Friday, December 30, 2011

Old School Wisdom - Go Back in Time to Go Forward in Your Training!

!±8± Old School Wisdom - Go Back in Time to Go Forward in Your Training!

Many advances have been made in energy, health, technology, and other areas of life. In strength training, not so much! Stop trying to be original. Tap into the wisdom of our strength forefathers and start getting results! Why pave a new path when there's already a good one to follow? Here are two routines inspired from the past to begin your journey.

The Stage Routine

Front row and center for quick size and strength gains!

This training system was popular with legendary Canadian strongman, Doug Hepburn, who was considered to be the strongest man in the world at his peak. It will help advanced trainees break through strength plateaus in a short period of time.

The routine involves only 2 exercises per workout and 2 stages per exercise for size and strength gains. Stage 1 will increase relative strength and Stage 2 will induce functional hypertrophy (i.e. muscle mass that produces high levels of strength).

Take a look at the program but don't blink because it will go by pretty quick!

Day 1 - Chest and Biceps

A1) Flat Barbell Bench Press

A2) Standing EZ-Bar Curls

Day 2 - Legs

A1) Front Squat

A2) Lying Leg Curl

Day 3 - Back and Triceps

A1) Wide-Grip Sternum Pull-Ups

A2) Standing V-Bar Pressdowns

Stage 1: 8 x 1 @ 50X0, 100"

Stage 2: 5 x 5 @ 40X0, 90"

Note: Start with a 3RM load for Stage 1 and a 7RM load for Stage 2.

I suggest that you use the first workout to find your true 3RM (repetition maximum) and 7RM loads, then commence the stage method the next workout. Only increase the weight when all reps for that stage have been successfully completed. The key is to be successful, so leave a little in reserve at the beginning.

Make sure to warm-up thoroughly by using several sets of low reps (5 or less) with progressively heavier loads until you reach your working weight.

This program will last a month. Each workout is performed once in a 5-day period (i.e. Day 1 - Day 2 - Off - Day 3 - Off) for 6 workouts then switch to a new routine. As mentioned above, the first workout is used to find the correct training weight. The next 4 workouts will incorporate the stage method - you should peak on the 5th workout with a new one-rep max on all lifts.

Taper on the final workout by performing only 3-5 sets of as many reps as possible at a 20X0 tempo resting 90 seconds between sets with the original 7RM load. You should notice an increase in number of repetitions performed at that weight. Most people will decay by 1-2 reps per set. Terminate the exercise if you hit 5 sets or drop 3 reps from one set to the next. This will be a short workout. Get in; do your thing; and get out. You may be tempted to do more. Don't!

If you have been plagued with injuries and are apprehensive to perform maximum singles, stick to the 2-3RM range for Stage 1 and 5-7RM range for Stage 2. The program will work just as well.

Also, you'll notice that all "A1" exercises are multi-joint movements and all "A2" exercises are single joint movements. Many people are concerned about maximum singles on isolation movements. Listen, either you lift the weight or you don't, but if it's still an issue, then substitute a compound movements instead:

Standing EZ-Bar Curls -> Close-Grip Chin-Ups

Lying Leg Curl -> Bent-Knee Deadlift or Snatch Podium Deadlift

Standing V-Bar Pressdowns -> Parallel-Bar Dips or Close-Grip Bench Press

Do not be fooled by the low number of exercises and the low number of repetitions. Many times, less is more and this routine is no exception! The high intensities used for a large number of sets produces great results. Rest assured that the whole body is trained - and trained hard - with this program.

Isometronics

The secret strength and muscle building system of the past and present!

This routine utilizes partial movements and static contractions to break through training plateaus. Partial movements are excellent to shock the system when stagnation occurs - they help to disinhibit the nervous system - and isometrics are great to gain strength at specific joint angles.

In the 1960's, isometronics (a blend of isotonic and isometric contractions) were promoted as a new secret strength and muscle building system. A couple decades later in his book, The Development of Physical Strength, Anthony Ditillo declared that "isometronics can make you a superman!" Ditillo believed that combining heavy, intense muscular exertions and isometrics in a power rack was "the most potent tool available for increasing physical strength."

The system is just as effective today as it was back then.

I picked up many of the details of this method in the mid 90's from strength and conditioning coach, Charles Poliquin, who is a strong believer of using the power rack to promote rapid strength and mass gains. According to Poliquin, the average intermediate bodybuilder can expect to beat his personal records in the curl by 10-25 pounds, and in the close-grip bench press by 30-45 pounds in only 3-4 weeks with this system!

Let's take a look at the routine.

Day 1 - Chest, Back and Shoulders

A1) 45 Degree Incline Barbell Bench Press

A2) Mid-Grip Pull-Ups

B1) Braced One-Arm Dumbbell Press (neutral grip)

B2) Kneeling One-Arm Pulldown (neutral grip)

Day 2 - Legs and Abdominals

A1) Back Squat

A2) Lying Leg Curls (dorsiflexed)

B1) Snatch-Grip Romanian Deadlift

B2) High-Pulley Crunch

Day 3 - Arms

A1) Close-Grip Bench Press

A2) Standing Mid-Grip Cable Curls

B1) One-Arm Dumbbell French Press

B2) 45 Degree Incline Dumbbell Curls

Isometronics involve lifting through a partial range of motion usually in a power rack (but not always), and finishing each rep with an isometric contraction. Take a third of the range of motion and do 3 sets at 3 different angles of an exercise for a total of 9 sets.

The order you perform the 3 ranges is important. Pick the heaviest (i.e. strongest) weight angle first:

a) Top -> Middle -> Bottom for Incline and Close-Grip Bench Press, and Squats

These exercises are performed in a power rack for 5 reps per set using a controlled tempo (i.e. 2 seconds to lower the bar, gently and quietly touching the lower pins, and two seconds to raise the bar). Then on the 5th rep, try to rip through the top rack pin for 6-8 seconds. Research from Germany shows that 8-second isometrics are enough. If you can make contact with the upper pin then the weight was too light. If you only have one set of pins in your power rack, then lower the bar just shy of resting on the pins and hold the 8-second isometric there. Make sure not to hold your breath during the isometric action. If you selected the proper load, you should not be able to do another concentric repetition.

b) Bottom -> Middle -> Top for Pull-Ups, Leg Curls, and Cable Curls

For these exercises, you perform 5 reps again using a controlled tempo (i.e. 2 seconds up and 2 seconds down), but this time on the 5th rep, pause for 8 seconds in the middle of the range.

The next workout for that body part will occur 5 days later and involve conventional training using hypertrophy parameters. Continue to alternate between isometronic and conventional workouts for six workouts as outlined below.

Workout #1, 3, 5 - Isometronic Training - A) 9 x 5 @ 2020, 120" B) 3 x 8-10 @ 3010, 60"

Workout #2, 4 - Conventional Training - A) 5 x 5-7 @ 4020, 90" B) 3 x 8-10 @ 3010, 60"

Workout #6 - Taper - A) 3 x 8-10 @ 2010, 120" B) 2 x 12-15 @ 2010, 90"

This form of training will induce deep and severe soreness. It is a quick way to gain size as the isometrics create high tension for fast-twitch fibers leading to hypertrophy. This system is also excellent to boost strength and blast through sticking points, but do not use isometronics often in a training year as it is quite stressful to the nervous system.


Old School Wisdom - Go Back in Time to Go Forward in Your Training!

Saving Manual Garden Tiller

Monday, December 26, 2011

Bulking Up - How to Squat Correctly

!±8± Bulking Up - How to Squat Correctly

Time and time again I see it down the gym. I'll be in the middle of my intensive routine that I consistently do three times a week, I'll finish off one of my exercises and I'll make my way over to the squat rack only to be greeted by a bicep boy who's clearly not got a clue what he's doing or why he's doing it. It annoys me so much, mainly because it's like looking in the mirror and seeing myself 7 or 8 years ago. I remember how much time and effort I wasted down the gym for little to no results. I think to myself "If only I could teach that kid to squat, dead and bench properly, he'd be well on his way to achieving a better physique". Let this be a lesson to you, don't be another bicep boy victim. Apart from the fact that they are all tiny because they haven't been training correctly - they are also the butt of all the jokes!

In this article I'm going to quickly describe the correct technique for squatting correctly so that when the bicep boys have finished, you can give your legs the workout that they deserve.

How to squat

1. Mount the bar on the squat rack just below should height. The bar should be just below should height because the perfect place for the bar is just below the hard bit on your spine. Generally speaking you'll find that powerlifters adopt a lower bar than conventional bodybuilders but it is also largely to do with biomechanics.

2. Walk up to the bar, put yourself in a position to take the bar off the rack. When you lift the bar off the rack, do so like you mean it!! Don't slowly lift the bar off, push it off with force - it's a mental thing; I don't know why but when you lift the bar off quickly it just feels lighter!

3. Walk out backwards steadily. ONE step is fine - you don't need to go for a walk around the gym.

4. Feet should be slightly wider than your shoulders with your feet flared at an angle of between 20 and 45 degrees. This angling allows you to get deep in the squat and is an especially useful technique if you're not very flexible!

5. Start the descent by pushing your bum as far out behind you and sitting down like you would on a toilet. Make sure your knees follow the lines of your feet (flared).

6. At the bottom of the squat the top of the quads should be below parallel and you should remain tight in your hamstrings. DON't loose this tension - if you do, you'll have a hard time getting it back up. Don't bounce off the floor, make a smooth powerful transition.

7. As you lift the bar back up, DON'T lift your chest up!! The chest must stay down. Keep the tensions in the hamstrings and drive the bar up keeping a tight, strong back.

8. Return to starting position.

It's probably true that describing the squat in an article isn't the best for of medium, however sometimes it can be useful to have written instructions to take to the gym and remind you what you should be doing. For a more visual lesson, use YouTube to find any video by Mark Rippetoe - this guy is one of the best power and strength coaches in the world. Watch one of the videos of him coaching the squat and you'll have a great idea of what you should be doing.

Shut up, squat and see you at the gym!


Bulking Up - How to Squat Correctly

Simplehuman Trash Cans Order Jvc Minidv Camcorder Sale Off Proform 480 Csx Recumbent Bike Discount

Wednesday, December 21, 2011

Monday, December 12, 2011

Are You Doing Your Squats?

!±8± Are You Doing Your Squats?

The barbell back squat is the weight room definition of underrated and misunderstood. Flawed myths cover this movement into thinking it is some form of demon. First of all, squatting below parallel is not bad for your knees; second, squatting works and balances the leg muscles better than any other exercise; third, the hormonal response released during this tension cannot be compared by any other.

Now, when performing the squat there are a few guidelines you need to know:

1) Feet at 30 degrees. This allows your adductors to shorten during the concentric contraction and assist with the load. It takes stress off the knees during the eccentric phase, and it allows you to squat with the proper depth without stressing the quads.

2) Wrists straight. You don't want your wrists to do any pulling during the lift. Keep the thumb over the bar and make sure your wrist is straight.

3) Push your chest out. Pushing your chest out creates a natural arch in your back; it is something that you want to do. It puts the spine in a more neutral position so that the weight doesn't put too much stress on it.

4) Use the Valsalva maneuver. Don't "exhale" during the concentric part of the lift. When lifting for endurance this is fine as it can allow better recovery and more endurance, but during a heavy lift you want to fill your stomach full of air and exhale at the top of the lift. Think about it, when you're on the toilet do you exhale as the big one emerges or do you exhale? Your body knows what to do when its under stress. The key is now to think about it.

5) BREAK parallel! This part cannot be stressed enough. Parallel is when the patella is higher in elevation than the hip. This causes your hamstrings to get a better stretch at the bottom and allows them to contract harder and push with the load. The squat should work the hamstrings, glutes and quadriceps muscles so evenly that no imbalance can be caused. If you are not hitting parallel, it is a partial squat and partial squats stress the quads without stressing the hamstrings. We all know that overdeveloped quads and weak hamstrings contribute to anterior cruciate ligament injuries.

6) Keep your back the way it should be. This depends, if you're doing a low bar squat then you want to keep your back around 45 degrees. You want the bar to be parallel to the feet at all times, knees will follow your toes and you will go slightly forwards. The hips and knees should break simultaneously and they should extend simultaneously, but if you have trouble learning this then allowing the hips to break first can be used as a tool. If the person still cannot get used to breaking at the knees first, then using proper depth box squats as a tool for a few weeks will program the proper motor pattern. If the knees are the first thing to break, then the bar path will be straight down and will cause stress to the knees. You want it to be simultaneous!

7) Always FACE the rack! Never walk backwards to rack the weights. That is an accident waiting to happen. Take about 2-5 steps backwards after you unrack the weight and do your sets, then move forwards with the weights so you can see where you are racking it. If possible, make the bar touch the post before the hooks that the bar rests on so that you know for sure what you're hitting.

First thing you need to know is there are two squatting variations: the high bar (Olympic squat) and the low bar (powerlifting squat). The high bar squat allows the weight to be rested on the upper trapezium muscles, while the low bar forces the bar on the posterior deltoids. Since the low bar squat has the resistance closer to the hip, it causes you to move forwards at 45 degrees to keep the bar stabilized in the right position. Low bar squats allow you to use better hip drive.

Now, here is the concentric difference between the two squat variations: the high bar squat primarily stimulates the glute muscles, and the secondary muscles are the quads. The low bar squat primarily stimulates the glute muscles, and the secondary muscles are the hamstrings. See what I'm saying? So if you want to work your hamstrings harder, do your squats with hip extension at a greater distance with low bar squats than high bar squats.

I prefer high bar squats; they are more natural. I also feel the hamstrings get a good stretch at the bottom regardless of the bar position and the hamstrings are worked heavily as stabilizers even during a high bar squat. Whichever you choose is highly up to you, but high bar squats also allow deeper depth. You should always squat as low as you can, but if you can't, parallel squats work you just fine.

Squatting should be performed with an Olympic par and in a power rack or squat rack; the power rack is the preferred environment as it catches the weight for you if you miss a rep. Keep your squats as natural as possible and remember that you're not leg pressing, so you need to use the hip to push the weight up and not push from your feet like you would with a leg press.

The squat works the core, the hamstrings and the spinal erectors in a safer and more sensible manner than any other leg exercise. Loading is applied during a squat parallel to the long axis of the tibia, which is the larger bone that ranges from your ankle up to the patella. This means that when the actual concentric and eccentric movements are occurring, the hamstrings are activated a stabilizer muscles coming down and allow a counter-regulatory effect on the pull of the quadriceps. The stretch of the hamstrings and adductor muscles, activated through proper feet placement, help to neutralize tibial translation, causing absolutely zero stress to the anterior cruciate ligament.

Squat performance demands the contraction and development of many stabilizer muscles, such as the core. Synergistic involvement from the abdominals, erector spinae, trapeziums and the entire back muscles. Squats therefore have a systemic effect on anabolism, promoting overall body growth.

Another thing about the squat is the hormonal demand. Testosterone, which is the anabolic muscle responsible for rapid hypertrophy and strength production, and is also the primary reason men are stronger than women, is released more significantly during this exercise than any other. Squats stress the entire kinetic chain of the body and keeps isometric tension on the upper back and core.

Perform your squats!


Are You Doing Your Squats?

Whalen Furniture Quickly Kitchenaid Mixer Recipes Buy Online Shop Vr2500 Pressure Washer

Thursday, December 8, 2011

Best Home Gym Equipment - What You Need to Build the Best Home Gym

!±8± Best Home Gym Equipment - What You Need to Build the Best Home Gym

Is it really possible find the best home gym equipment?

When we are talking about building the best home gyms we are also referring to find the right exercise equipment. That to me is more important than where do I place the mirrors or what kind of flooring do I use.

In this article you will find tips that will help you in building or in finding the best home gym equipment. It does not take a lot of luck, it just takes a little bit of research and some good old-fashioned work.

Focus on Equipment That Works

There are many options when it comes to a home gym one of the considerations is how much room you have. And what is your budget. If you can spend up to 00 and pretty much you can purchase any of the gyms available on TV such as Bowflex, Total Gym, Bio Force TNT, Crossbow etc.

Sometimes just a simple weight bench and free weights is enough however, you must remember to take safety into consideration. It's going to be difficult to workout at home and do a bench press with no one there to spot you.

So you may want to throw a Smith machine or power rack into the equation if you plan on using free weights

What Are Your Fitness Goals

If you are looking to build a "bodybuilder" type of body then you're going to need more than just a set of free weights. If you're looking to get leaner, stronger, and have a ripped six pack abs then you will need to purchase the best home gym equipment. Below are just a few:

* Resistance Bands

* Isometric Exerciser or Isometric Exercise Equipment

* Adjustable Dumbbells

* A Used Bowflex or Total Gym Or Other Home Gym

* Select the Correct Room in Your Home or Apartment

Whatever room you choose as your home gym make sure that there is at least 10 feet of headroom and that it has plenty of good ventilation. If you can afford it, pick up a small fan as well. Plenty of daylight will also help to keep the room bright and cheerful.

In addition, if your budget allows it pickup some self-adhesive mirrors at Home Depot or a similar retail store. Be able to see yourself performing the exercise -- using correct posture and form -- will also go a long way towards keeping you motivated and injury free.

Finding the best home gym equipment is not that difficult -- it just takes some research and common sense!


Best Home Gym Equipment - What You Need to Build the Best Home Gym

Comparison Klipsch Center Channel Speaker

Monday, December 5, 2011

Why You Shouldn't Be Using These Exercises In The Gym

!±8± Why You Shouldn't Be Using These Exercises In The Gym

Have you ever imagined using potentially dangerous exercises in your workout? You have to be very careful with strength training equipment because it may not be the most effective or functional available.

How do you know that the exercises you are performing are safe? Found below are some potentially dangerous exercises with suggestions on how they should be done correctly or avoided completely.

Sit-up

Traditional abdominal exercises such as the sit-up, incline sit-up and hip-raises are exercises that are used to train the obliques and the upper and lower abdominals.

They are performed by first anchoring the feet on an abdominal board which prevents you from sliding back then raising your shoulders up towards your feet, tensing your abs at the top of the movement. Slowly lowering your shoulders back down and then completing the movement again.

The dangers of performing this movement are the shearing forces on the vertebrae and spinal discs when you have a flexed and rounded spine. In this position, the pressure is mostly placed on a very small area of the disc area, which can cause small ruptures.

The safest and most productive way to train the abs is to use the brace and hollow technique. This is a basic isometric exercise that helps strengthen the abs and the muscular girdle around your waist.

Pec Deck

The pec deck is an exercise that trains the chest (pectorals) and shoulder (front deltoid) muscles.

This exercise is performed by sitting at the machine with your back flat against the back pad. Placing your forearms on the padded levers and position your upper arms parallel to the ground.

Pushing the levers slowly together and squeezing your chest muscles at the end of the movement. Return slowly to the starting position.

This exercise is potentially dangerous because it places the shoulder into one of its least stable positions, the dislocation position. Because of the extreme position when performing this exercise at the starting position it can also cause tearing of the ligaments and injury to the rotar cuff tendons.

More effective and less dangerous is the bench press, keeping the arms at shoulder width and exercising in the strongest range of motion (partial reps) and the parallel bar dip with the elbows out.

Behind the neck Press

This exercise trains the neck (traps) and shoulder (deltoid) muscles and is performed by placing a loaded barbell onto your upper back just above the trap muscle.

This exercise is done by standing with your feet about shoulder width apart. Placing your hands on the bar about three inches wider than the width of your shoulders.

Pushing the bar overhead to arm's length, holding and then slowly lowering back down to your shoulders. This exercise can also be done seated. Try performing it in a smith machine or power rack for added safety.

This is an exercise that places the shoulder joint into the dislocation position and the range of motion puts unnecessary stress on the rotator cuff tendons of the shoulders.

Many trainees may experience injuries from this behind-the-neck movement. As with before stick with dips and bench presses for your shoulder work.

Dead lift
The dead lift is a compound movement that works the hips, lower back and also exercises the hamstrings and glutes (buttocks).

You can perform the dead lift by approaching a loaded barbell and taking a stance about as wide as your shoulders. Grip the bar so that the arms are slightly on the outside of your thighs.

Your feet should be pointing straight forward with the shins about two to three inches from the bar. Heave the load upward using the hips and lower back keeping the back straight and the bar as close to the shins as possible.

At the top of the movement hold for a few seconds and then lower the bar to the starting position. The exercise has a knock-on growth effect on the whole body when worked hard.

The problem with the lift is that if the spine becomes rounded during the lift it then becomes dangerous. Because of the forces working on the vertebrae and the spine injuries may occur.

A lot of these problems can be solved by keeping the back as straight as possible during the lift and keeping the bar held close to the body during the lift as the forces are then not that excessive.

Leg extensions

Leg extensions are arguably one of the most popular leg exercises for strengthening the quadriceps (thigh) muscle.

These are done by using a leg extension machine and sitting in the seat with your feet hooked under the padded lever. Raise the weight with your legs until they are pointing straight out in front of you. Hold briefly, and then slowly lower the weight back to the starting position.

Leg extensions are a potentially dangerous exercise because when only the shin is in motion, the exercise draws the patella back onto the femur increasing joint compression forces, which can damage the connective tissue and the ligaments supporting the knee joint.

It can also cause anterior knee pain so people with existing knee problems may aggravate them by doing this exercise.

For greater safety and equal effectiveness, try doing the Squat, Leg Press, and Lunge for safer and more functional use.

Some food for thought isn't it, so try to avoid these exercises if possible or try to perform the alternatives given.


Why You Shouldn't Be Using These Exercises In The Gym

Cheap Tiller Attachment For Garden Tractor

Friday, December 2, 2011

Google alembic abstracts centermost tour

First presented at the Google Efficient Data Centers Summit, hosted at Google headquarters in Mountain View, CA on April 1, 2009. For more information about the event or Google's data center efficiency efforts, please visit: www.google.com

Garden Hose Extender Buy Now

Wednesday, November 30, 2011

Bruce Lee's Body Building Workout and Diet

!±8± Bruce Lee's Body Building Workout and Diet

Bruce Lee created a martial art called "Jeet Kune Do" or the "Way of the Intercepting Fist." However, as well know as he is in the martial arts... he is highly regarded for his physical abilities and ripped physique. The Bruce Lee body has become an icon for what an action star should look like today.

Let's face it, audiences are no longer willing to accept an actor who puts on a "Muscle Suit." From Brad Pitt to Will Smith -- it seems every A-list Hollywood actor has been emulating the muscular yet ripped Lee type of physique. What made him great was a combination of his workouts and his diet program.

The Bruce Lee Diet Plan

Lee always consumed a lot of Chinese food which are high in fiber.

Some foods that are high in fiber are:

* Fruits
* Vegetables,
* Breads,
* Beans
* Cereals

These foods are also high in antioxidants and will help cleanse your body.

Like many bodybuilders today, he usually ate 6 times per day. This kept his blood sugar level stable and his metabolism burning at a higher rate. He was also a big fan of keeping his body adequately hydrated -- by and large he drank 11 to 12 glasses of water per day.

In addition, from his bodybuilder friend... learned of the importance of maintaining a high protein, low carbohydrate diet. (Bruce Lee loved protein supplements and would routinely down 1 to 2 protein shakes per day.)

The key to gaining muscle -- besides working out... is in consuming enough protein. Protein makes up anywhere between 15 to 20% of our bodyweight. The bottom line is that protein is indispensable and it's the raw material that is needed to build muscle and other bodily tissues.

Of course, in his day one of the most popular protein supplements was casein. Today, we know that whey protein can keep us in a positive nitrogen balance state easier and quicker than using just casein protein.

The Bruce Lee Workout

His workouts were intense. Even Joe Weider... "The King of Bodybuilding" remarked that Bruce Lee's body was light years ahead of it's time. Bruce incorporated many different components into his workout program. Isometrics, free weights, yoga, and bodyweight exercises just to mention a few. Bruce Lee abandoned free weights really early on in his training. He felt that having big bodybuilder muscles was of no advantage to a martial artist. He focused more on what he referred to as "Functional Strength."

He realized very early on that isometric exercise was able to provide him with superior strength gains. He also used an "Isometric Power Rack" for a while in his training program. If anything defines Bruce Lee it's his ability to think outside the box. His mentality of... "use what works and discard what doesn't" -- has made him an innovator in many different fields.

For example, Bruce used every known isometric exercise device available in his training including a device that was then called the Tensolator. Using isometric exercise equipment was something that he made part of his training routine. And in fact, so have many mixed martial arts practitioners today!


Bruce Lee's Body Building Workout and Diet

Top Rated Vacuum For Pet Hair Sale

Sunday, November 27, 2011

Inverted Row (Feet Elevated) - (Strength)

Place a bar in the power rack at about waist height. A bench is placed approximately three quarters of a body length away. Put the feet on the bench and the hands on the bar palms facing in. Hold the torso perfectly straight, feet are pointed straight and the legs are no more than hip width apart. From this position pull the chest to the bar and then slowly lower down until the elbows are almost fully locked.

Mitsubishi 62628 This Instant

Friday, November 25, 2011

Strength Training Vs Bodybuilding - Whats the Difference?

!±8± Strength Training Vs Bodybuilding - Whats the Difference?

Most people who begin pumping iron have only a general goal when they start; to get into good physical condition. At some point their goal coalesces and they take the fork in the road that will lead to their destination; developing as a bodybuilder or as a power-lifter.

The tools they use are the same, in general, regardless of which fork they take. Bodybuilders and weightlifters used the same type of weights, the same racks, the same benches and often the same gyms. How they use that equipment is the difference that defines their goals.

A bodybuilder wants to develop his muscles in shape and size so that they display well. Their workouts consist of heavy weights lifted for multiple repetitions for a number of sets... and in an effort to tear down their muscle tissue so that the protein they ingest will rebuild it bigger, stronger and more shapely.

A weightlifter or power-lifter has a goal of lifting as much weight as they possibly can for one repetition. A weightlifter trains for two different lifts; the Snatch and the Clean-and-Jerk.

The power-lifter, on the other hand, trains for three different lifts; the Bench Press, the Squat and the Deadlift.

Both the bodybuilder and weightlifter will, in their training, work up to their maximum weight on each lift by progressively increasing the poundage on the barbell for each set they perform.

The goal of the bodybuilder is the maximum weight he can lift for six to ten repetitions. The weightlifter/power-lifter is looking for the most he can lift for one rep.

The bodybuilder will perform a workout routine that consists of many different exercises for each muscle group, often beginning with high-rep warm-ups and working up in weight until their max is reached.

They then move on to another exercise for the same muscle group, then another. They will complete three to five sets of three to five different exercises for each muscle.

A weightlifter will focus only on those exercises that work the muscles used in their two or three competitive lifts.

To balance their muscle exercise and development, they will perform some of the exercise the bodybuilder performs for arms, shoulders, chest and legs, but their goal is to strengthen them, not to build the muscles.

Many weightlifters and bodybuilders began their workout careers in one form of the training, only to switch to the other side of the gym as they developed more defined goals.

The great bodybuilder and trainer, Bill Pearl, said it best. Remarking about bodybuilding with weights, he said, "Lift like a bodybuilder, not a weightlifter." His point was that bodybuilders should be lifting heavy weights, but for multiple reps.

If they were most impressed by how much weight they could lift for one rep, they should be weightlifting or power- lifting instead.

All of us who pump iron as bodybuilders still like to see how much weight we can lift for one rep on occasion. The risk of injury that could curtail training is always a specter when you do something your body isn't used to, so always have a spotter when you are going for the max.

Weightlifters do develop their bodies, but not in the same shapely, formed manner as do the bodybuilders. Lifting weights, regardless of the reasons for doing so, will develop muscles. Developing shapely muscles does require specialized exercises.

While a weightlifter will do biceps curls to increase the strength of his arms, he will focus on heavy curls, not the shaping exercises of a preacher bench or sets of incline dumbbell curls.

Thin skin and vascularity is the goal of bodybuilders, while any vascularity that occurs in a weightlifter's muscles is a byproduct of their exercising, not the desired result.

The approach to their diets will differ between bodybuilders and weightlifters. Both want energy derived from carbohydrates, but the bodybuilder will load his system with proteins to gain size. The weightlifter will consume foods that will give him greater strength and endurance.


Strength Training Vs Bodybuilding - Whats the Difference?

Saved Compare Elliptical Machines

Monday, November 21, 2011

5 Simple Steps to Amazingly Toned Legs

!±8± 5 Simple Steps to Amazingly Toned Legs

With the holiday season coming, the jeans come off, the skirts go on and legs come out to play... assuming you're a girl that is! But are you really confident about having your legs on show this Summer? If you want to improve the shape of your pins and give yourself a real confidence boost, here are 5 simple steps that you can easily fit into your everyday routine.

1. Power walking

Walking is great aerobic exercise, but power walking takes it to a whole different level. You get the aerobic, fat-burning benefit of walking, with added muscle toning from the longer, more powerful strides. Power walking is particularly good for toning your bum, hamstrings and calves - all the muscles at the back of your legs. And how do you power walk? Just lengthen your stride and walk like you're late for your best friend's wedding. Just 10 minutes a day will make a real difference, so if you walk to the station or anywhere else on a daily basis, simply pop your trainers on, put your heels in a bag and power walk there!

2. Stair stepping

If power walking is the ultimate exercise for the back of your legs, stair stepping is the ultimate for toning the front. Each 'step' really targets the quadriceps, the group of muscles that make up your thigh. Like power walking, stair stepping doesn't have to be done at the gym. Give up the lift and use the stairs at your office whenever you can. Make a rule at home that you're only allowed to use the upstairs toilet or talk on the telephone upstairs. If you can rack up at least 100 stair steps a day as a routine you'll start to notice your legs slimming and firming up. And remember this quote - "A person's health is to be judge by that which they take two at a time - pills or stairs" - so don't be afraid to double-up!

3. Isometric exercises

Iso-what-ric? I hear you say! Isometric means holding a certain position so the joint is locked. This "static contraction" of the muscle is fantastic for toning and firming, and best of all you'll hardly break into a sweat. This makes isometric exercises something you can easily do at home or at the office - just as long as you're not wearing tight trousers! Three great examples are 'isometric squats' and 'isometric lunges' and 'isometric heels raises'. Simply hold the yourself in the squat, lunge or heel raise position for 20 to 30 seconds, whenever you get the opportunity. Just don't get busted by your boss or he/she will wonder what you're up to! Try to aim for 10 minutes a day in total, and be prepared to feel your legs burn a bit.

4. Eat more protein

Never underestimate the power of good nutrition to change the shape and feel of your body. To tone and firm up any muscles of your body, including your legs, it's important that you have enough good quality protein in your diet. At the end of the day that's what muscle is made from - meat, poultry, fish, seafood, eggs, nuts, beans, pulses, soya, and so on. Not only that, it is well proven that protein helps to suppress the appetite and reduce sugar cravings, so getting enough protein into your lunch and dinner will help you to resist the chocolate bars you've been wearing on your legs all winter! Which leads nicely to the next simple step...

5. Eat less sugar

If you have a high-sugar, high-carbohydrate diet you'll be wearing a nice thick layer of it around your newly toned thighs. We are constantly reminded by the media and doctors that a diet high in fat is the major cause of heart disease, but with all that nagging about fat we often fail to realise that it is actually sugar in our diet that is causing our weight gain - and flabby thigh disease! Drop the biscuits with your tea, clear out your cupboards of chocolate and crisps, and reduce your portions of bread, pasta, potatoes and alcohol. Instead, try to get into the habit of filling up on good quality fruit, yogurt and low-sugar snacks between meals and keep the drinking to the weekends.

So here's your 5 step challenge... (1) 10 minutes of power walking a day, (2) 100 stair steps a day, (3) 10 minutes of isometric exercises a day, (4) add protein to your lunch and dinner, and (5) reduce the amount of sugary carbs in your diet. Soon enough you'll be so proud of your legs you'll be wanting to show them off on your next skiing trip!


5 Simple Steps to Amazingly Toned Legs

Top 10 Canon Sx210is Kitchen Artisan Stand Mixer Discount Buying Humidifier Warm Mist


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links